KH IM, Samco hose pic, & 2pc EM

[Jim Green]

--- JShadzi at aol.com wrote:
> Yes, the KH puts the air temp sensor in the IM, but
> the intercooler can
> easily be drilled to house the air temp sensor too.
> Javad
>
> In a message dated 12/10/2001 7:51:26 PM Pacific
> Standard Time,
> kbogach at home.com writes:
>
> << I saw such intercooler on local junk yard (I
> don't know exactly what motor
> was though) but I noticed that it missing a port for
> inlet air temperature
> sensor. At least it was
>  not present in the place where MC motor type ICs
> have it. Can you comment on

Alright I can't take it any longer, here is a crappy
pic of the KH manifold with air temp sensor mounted on
the pass side.  It's the thingy with the yellow and
brown wires coming out of it by the blue wire ties
holding my TPS in place.....You can also see the Samco
hose with the bypass valve mounted in it.
http://www.geocities.com/jeg1976/samco.jpg
Sorry, I only had enough juice for one pic, plus I
need to finalize some stuff in there.
Now for my question, I may be picking up an MC-2
engine to rebuild.  I am under the impression they
already have the two piece exhaust manifold.  Are
there any clearence issues with putting it in the
90tq?

Thanks,


=====
Jim Green
'89 90tq EFI
http://www.geocities.com/jeg1976/car_home.html

__________________________________________________
Do You Yahoo!?
Check out Yahoo! Shopping and Yahoo! Auctions for all of
your unique holiday gifts! Buy at http://shopping.yahoo.com
or bid at http://auctions.yahoo.com