Custom Audi Pistons FS

[Mike Del Tergo]

Fellow listers,
I am having my WR rebuilt versus swapped out for an MC or other.  Given the
cost and scarcity of OEM pistons, I am having some made through Wiseco,
which a few other listers have used with good results.  They have a run
minimum, which I am 1/2 sets away from meeting.  I am going slightly larger
than stock, roughly the second stock over size avail from Audi, 80MM. (Stock
WR/WX, 79.45)
The pistons will be similar to the factory design, 7.0:1 compression ratio
but machined from 2618 forgings for durability. (Stock are not forged)The
rings will be the "XG" package, 1.1mm top, 1.2mm middle, and
2.8mm oil. Pins and pin fit included. We'll add a few grooves for detonation
resistance and to improve sealing but didn't alter ring spacing or location.
They should be ready to run in 3 wks.
I'm looking at ~$525 delivered.
Please let me know of any interest.
Thanks
Mike


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.