How to remove door control panel on 80Q?

[Tom Nas]

"Andrew Lundy" <fast928 at prodigy.net> wrote:

>1)  Remove the screw on the bottom, backside of the armrest.
>2)  Remove the lower cover...it just pulls out.  (Pull down on the screw
>side)
>3)  This will expose two more screws...Remove these.
>4)  Now the panel is free.  Remove the top side (by mirror controls) first.
>Then slightly "slide" forward and pull upward.  It's a tight fit but it will
>come out.  (It is important to pull the top side (mirror controls) first)

Aren't there any screws in the door jamb area? I seem to recall a screw
near the top of the panel...

Tom
(who hates reinstalling these panels as the holes always refuse to line up)