How to remove door control panel on 80Q?

[Lundy, Andrew]

Yeah Tom,

There is one screw on each side of the door plus one at the door handle but
that's not what he is doing.  You only need to remove those three screws if
you are removing the entire door panel.  He is just removing the control
module for the windows and mirrors so those last three can remain!!
---
Andrew Lundy
90 80q
99 A6q

-----Original Message-----
From: Tom Nas [mailto:tnas at euronet.nl]
Sent: Monday, December 17, 2001 2:17 AM
To: quattro at audifans.com
Cc: Andrew Lundy
Subject: Re: How to remove door control panel on 80Q?


"Andrew Lundy" <fast928 at prodigy.net> wrote:

>1)  Remove the screw on the bottom, backside of the armrest.
>2)  Remove the lower cover...it just pulls out.  (Pull down on the screw
>side)
>3)  This will expose two more screws...Remove these.
>4)  Now the panel is free.  Remove the top side (by mirror controls) first.
>Then slightly "slide" forward and pull upward.  It's a tight fit but it
will
>come out.  (It is important to pull the top side (mirror controls) first)

Aren't there any screws in the door jamb area? I seem to recall a screw
near the top of the panel...

Tom
(who hates reinstalling these panels as the holes always refuse to line up)