cam lobs position in #1 TDC ???

[DGraber460 at aol.com]

--
[ Picked text/plain from multipart/alternative ]
In a message dated 12/17/2001 9:53:04 AM Mountain Standard Time,
kbogach at home.com writes:


> Spokes are closer to one side of the spoket. Does his side
> go toward the head?  (part # and other lattering is on the other side).
> One side has a mark as a dot and another as a line.

On my sprocket the spokes are closer to the front/radiator, and the dot goes
to the motor side.
One other _precaution_ (read warning!) to remember-the cam bearing caps are
numbered in such a way that NOT ALL the numbers face the same direction. Take
special care to check the aligment of each cap before tightening them down,
or you'll be buying a new head.

Dennis