MC-2 Guts

[alan pritchard]

wow, id like to see an s4 gasket on a i5!
----- Original Message -----
From: "Jim Green" <jeg1976 at yahoo.com>
To: "Quattro list" <quattro at audifans.com>
Sent: Monday, December 17, 2001 12:46 AM
Subject: MC-2 Guts


> I think I've found a good MC-2 engine locally for my
> rebuild.  Sorry Chris.  116k, 85 psi compression on
> all five cylinders.  This was checked without running
> the engine first, so everything was dry.  Are these
> good values?  Also, I'm building this to be a 300 -
> 350 hp engine so I want to do it right this time.  I
> don't want to do to much to the bottom end, but should
> I replace the rings or anything like that while I'm in
> there?  After that I'm going to use an S4 head gasket
> with ARP head studs and a P&P head with 40 mm intake
> valves.  Then onto a less restrictive EM/header and
> turbo in the future.  It would be nice to balance and
> blue print everything, but that can wait till next
> time:)
> TIA
>
> =====
> Jim Green
> '89 90tq EFI
> http://www.geocities.com/jeg1976/car_home.html
>
> __________________________________________________
> Do You Yahoo!?
> Check out Yahoo! Shopping and Yahoo! Auctions for all of
> your unique holiday gifts! Buy at http://shopping.yahoo.com
> or bid at http://auctions.yahoo.com