Best way to pass new wiring to the cabin???

[Marc Swanson]

> I'm going to put a oil pressure gauge and a pair of driving lamps on my 87
> CGT.
>
> What will be the best way to pass the gauge wire and the lamp harness to
> the cabin?

well there are a couple of good ways.

- try to sneak the wire past the firewall with another wiring loom that
already has a rubber grommet sealing the elements.  These are usually a tight
fit so it could be tough
- cut a hole in an existing blank rubber grommet..  on my 4kq there were a
couple of these.  basically you can just slice the grommet, pass the wire
through, and then seal with rtv
- cut a new hole in the firewall and seal with just the right sized grommet
from your local hardware store.


HTH

-Marc-
87 4ktq
88 90q