odd 2113 behavior, '89 200q, MC1

[Huw Powell]

> 2113 is supposed to be hall (distributor) sensor. Do these
> buggers fail intermittently? What's the fix? (sensor, entire
> dist, etc) And should I proactively change mine?

3 little wires go from the connector into the top of the dizzy and
conncet to the sensor proper.  An intermittent open wire is a distinct
possibility, experienced by at least several listers.  No connection =
no run.  Good connection, car runs fine.  You could look at yours to
make sure the wires are in good shape, clean the connector, etc. at
least.

--
Huw Powell

http://www.humanspeakers.com/audi/

http://www.humanthoughts.org/