type 44 oil pan rear 2 bolts removal - how?

[Tim Leonard]

Perhaps you should consider buying a few more tools to expand your Craftsman
kit in a plastic case. A 10mm ?"drive socket with 6" extension and ratchet
is VERY common and does this job without much thought.
Best regards,
Tim Leonard
----- Original Message -----
From: Konstantine Bogach <kbogach at home.com>
To: <quattro at audifans.com>
Sent: Saturday, December 22, 2001 5:01 PM
Subject: type 44 oil pan rear 2 bolts removal - how?


> I am surprised that this is not covered in archives.  2 rear bolts are
> hidden. There are 2 holes in tranny support (forgive me if it is called
> differently) which looks like are meant to get access to those 2 bolts
> but a little 10mm socket does not fit into the holes.. Special ultrathin
> socket?  Can I remove  that tranny support first? I could not find it in
> ETKA and I am not sure that all bolts are accessible.  Bentley says just
> drop subframe front and remove oil pan.
>
> Thank you
> Konstantin Bogach
> 200tq '89
> 200tqa '89
>
>