pics of cibies vs. hella h1/h4's?

[Ken Keith]

So, the reflectors are separable from the rear housing?

Thanks,

Ken

On 1 Feb 2001, at 16:13, Michael Dewar - Sun Scotland wrote:

> I have fitted a flat lens to a later sloping front unit with no
> problems. It appears the mouldings are identical
> 
> Buying the reflectors seperately is unlikely to be econonmically
> viable due to their cost from Audi.
> 
> High beam £52.00 + vat 
> 
> Low beam  £51.00 + vat
> 
> Mike
> 
> > 
> > Phil wrote:
> > > Cibie lenses _are_ replaceable and also aren't expensive - about
> > > $40.I did it to F600 and it made one _H at LL_ of a difference.  I've
> > > also done it to the bus.
> > 
> > I saw this on the parts fiche for my 90q the other day, anyone know
> > if the rear mouldings are the same between the sloping and the flat
> > euros, the only difference being the lens?
> > 
> > You can also buy the adjusters separately (or at least there are pt
> > no's for them) if anyone has them all burred due to some PO messing
> > with them with a dodgy fitting screwdriver... The fiche shows
> > virtually every part with a number (though some seem to be grouped
> > together) so it _seems_ like buying a new set of lights if your old
> > ones are suffering from chips and poor reflectors is hardly
> > necessary and only a lens and reflector swap _may_ prove to be more
> > economical.
> > 
> > Graham.
> > 
> > 85 90q.
> 
>