4ks washer question

[Roger D. Albert]

Hi all,

To Huw and Rich and L.L and other respondees, thanks for the info so
far.

> by the way, if you're getting the 2 or 3 swipes and no washer, 
> it's prolly not the switch.  if no action at all, probably is.

To Richard, after playing this weekend, I can certainly confirm all Huw
says.  My wiper washer is now working just fine (except for some washer
jet aiming issues - but I'll get that)

In fact, the washer part is barely a switch - certainly not an enclosed
one. The lever just mashes a couple contacts together.  Not much to go
wrong.  As to what was wrong with mine, I don't know, while trying to
figure out how to read the Bentley diagram, and doing some voltage
measurements, mine decided to work.  We'll see how it holds up, but its
good for now.

Now, if I get some slack time this week, I'm going to have a few
questions about reading the Bentley electical diagrams.  

thanks again for the input.
regards
roger

p.s.  Richard, when putting it back together, do be sure the catch/lip
on the dimmer switch engages the little pull tab that actually engages
the brights.  Otherwise, you get to do everything twice, and repair
stripped threads in one of the 3 screw holes.  Arghh.

later
roger