sticky clutch pedal

[Roa, Greg]

I have a similar problem with my 86' 4kcsq.  I replaced the clutch hydraulic
system, expecting that to help the problem.  Unfortunately it didn't.
However, when I was replacing the clutch master cylinder, I noticed that the
pin that connects the clutch master cylinder clevis to the pedal had worn
the clutch pedal hole out.  This allows the pedal to have about 3/4" of
travel where nothing happens.  So, when I do my clutch this weekend, I will
try and swap out the pedal.
Your UrQ has a similar setup to the 4kq, so the clutch pedal from one of
those might work.  Not sure about the cgt, or a 4ks, as they have a cable
operated clutch.

Anyone know if the pedal off of one of those will work?  (I have access to a
4ks parts car that I could swipe the pedal off of for mine)

Greg Roa
Cincinnati, OH
86' 4kcsq
93' 90 CS
83' 944


>From: audi90sq at yahoo.com
>Date: Wed, 21 Feb 2001 08:11:59 -0800 (PST)
>Subject: sticky clutch pedal
>To: quattro <quattro at audifans.com>, urq <urq at audifans.com>
>
>The clutch pedel on my 83' UrQ has a spot where where
>it feels like it is sticking/catching.  It feels like
>it is the hinge or sprng that is catching. Would a
>dedal cluster from a coupe gt fit the UrQ?  Thanks.
>
>Eric