Hydraulic hose woes--again

[JShadzi at aol.com]

Yes, all you need are the correct metric-AN adaptors.  I used an 18mm to a -10AN adaptor, to -10 hose, and used a Setrab oil cooler with -10 fittings...it all cost about $250, and I got a more efficient oil cooler in the process.  Trying to adapt the stock oil cooler is a lot of work, there are not the proper adaptors that I know of unless you cut the stock lines on the oil cooler side and use AN tube nuts to go the the AN line.
HTH,
Javad