lost power assist

[Konstantin Bogach]

Hi all.

After changing high pressure hose (to PA) and return line (from pump to
reservoir) I  power assist became much weaker and especially while
turning right. Assist is more or less ok for
turning left. I tried to turn only left but could not come to
destination place  :-). I bleeded system zealously according to Bentley
- no air bubles. Pump was not drained so I did not turn it manually
according to the procedure described in Bentley for putting back a pump
after rebuild.

Any idea would be helpful before I start to open all connections.
Thanks.

Konstantin Bogach.
200tq '89
Hightstown, NJ