Offset for 4000Q aftermarket wheels.

[Jörgen Karlsson]

> My 4KQ has the 2Bennett coilover/Koni, lowered about 1.6-
> 1.7 in., and runs TSW Imola 16 x 7.5 x 45mm, with 205/45-16
> Dunlop W10's. No rubbing, and I am happy with the set up. As
> I have mentioned many times before, the 45mm offset is not
> only ideal - it is mandatory for this set up. Longer
> lugbolts are required as well.

Thanks, do you think that that's the correct offset for stock height too?

By the way, the wheels I mentioned actually fit and with four of my bigger
friends sitting on the fender and in the engine compartment there are a few
millimeters left between the wheel and the fender. I think that there will
be problems with full lock on the wheel, but at 50% there's no problem.

Jörgen