Wheel Bearing Tool(s)

[Richard Beels]

Actually, it's IMPACT tools which are a no-no.  So put the impact gun down 
and feel free to use a non-impact air socket wrench....

At 13:52 1/17/2001,  Orin Eman was inspired to say:
> >
> > I have recevied a few inquires and they keep trickling in, so I'm posting
> > to the list.
> >
> > About the Hub Shark Tool:
> >
> > I found this page:
> > http://www.mytoolstore.com/oldforge/olf06.html
> >
> > Only difference is the tool I borrowed from my friend was bought from the
> > Hazet Distributor, it's the "Hub Shark" but it did not come with that
> > bracket seen on the web page.  It was also only $275 for the tool without
> > the disk puller etc., just the bearing puller/installer.  It's a very
> > beefy steel, and makes it unbelievably easy to change the wheel bearings.
> >  They pop right in and out.  Air gun highly recommended.
>
>Don't know about the Hazet, but DO NOT use air tools on
>the Schley.  The will wreck the threads on the mondo
>bolt really quickly.  (The Schley specifically says
>no air tools.)
>
>Orin.


Cheers!