ABS disabling, '88 5kcstq

[Beatty, Robert]

Phil,

When i changed my clutch, i took out my drive shafts and wire brushed them
on a bench grinder.  Cleaned up the teeth quite nicely.

Rob

-----Original Message-----
From: isham-research.freeserve.co.uk at pop.pol.net.uk
[mailto:isham-research.freeserve.co.uk at pop.pol.net.uk]
Sent: Tuesday, January 16, 2001 7:00 PM
To: auditude at neta.com; quattro at audifans.com
Subject: Re: ABS disabling, '88 5kcstq



> The problem is that junk and corrosion get on the "gear teeth" that
> the wheel sensors read, and cause the system to prematurely
> begin to modulate brake pressure as the wheel slows almost to a
> stop.

In my recent experience, the only fix is a new outer driveshaft.

--
 Phil Payne
 http://www.isham-research.freeserve.co.uk/quattro
 Phone +44 7785 302803   Fax: +44 7785 309674