TQW Harness Splice/was Need 87 5KTQA Rear Window

[Steve Jensen]

> Agreed.  I got one from a bone yard for ~$150 complete.  Only downside is
> that you will need to splice into the wiring harness.
>
> Dave

Actually, you don't even need to do that.  Pull the interior trim panels in
the left rear of the car (as you are looking at the back) and you'll find a
hefty white barrel shaped connector near the outer taillight.  Disconnect
and unbolt the single ground, and the harness pulls out towards the dome
light.

Did this last weekend when I lucked out finding a TQW hatch at the boneyard,
same color as my TQW, too!

-Steve Jensen
87 5kcstq
87 5kcstqw (waiting for a warm day for hatch transplant surgery)