wont rev past 5750, resolved - rotor arm part number

[alan pritchard]

heres the part number as it comes of the box, its a genuie bosch part

    1 St/Pc
     04 038
1234332300850
182          983

hope you can pull the useful bit out of that, ps im sure you can find a
rotor arm with a sensible cut out, of say 7000 if you speak to the right
person

----- Original Message -----
From: "Richard J. Andrews" <tech at flashmail.com>
To: "alan pritchard" <alanthecelt at alanthecelt.screaming.net>
Sent: Saturday, June 30, 2001 7:22 PM
Subject: Re: wont rev past 5750, resolved


I would like the part # for this rotor...
what kind of car was this again CGT? year?
i would like to eliminate the cutout. as well..

TIA!
rich
'86 4kq
At 06:41 AM 6/30/01, you wrote:
>thx everyone but it wasnt the fuel pump relay, popped into my local german
>and swedish (car parts), and asked for a 5cyl fuel pump relay, and asked
the
>guy behind the counter to check out the part no. on the relay i had, to
>which he replied that it was the same as what they would sell me.
>He asked about the problem and told me that would be the rotor arm, he
>showed me others, and sure enough they were stamped up with the cut out
rpm,
>so £3.50 later and i had a rotor arm with no rev limiter !!!! nice
>have to say its that much more fun to be able to see 6500-7000 rpm on the
>clock, makes it all that much quicker!!! wont often use it up there but its
>nice to know that when overtaking on the wrong side of the road, it wont
all
>stop as abruptly as before.
>So thanks everyone, but you were wrong this time. and thanks to a guy who
>knows his vws.