[200q20v] shifter boot

[Kneale Brownson]

A silicone adhesive would be easy to cut off/replace for servicing what's 
below the boot.


At 12:11 PM 07/16/2001 -0400, Chris Covington wrote:

>I was thinking about that, but what if I want to remove the boot to
>rebuild the shifter or something?
>Maybe I'll try to get ahold of those tabs.
>
>Chris
>'91 200q20v
>
>
>On Mon, 16 Jul 2001, Kneale Brownson wrote:
>
> > Aren't there supposed to be plastic tabs that do the fastening?  You
> > probably have tabs that are broken or stressed so that they no longer
> > supply holding power.  I think I've read about someone using clear silicone
> > adhesive (like bathtub caulk) to hold the square piece in place.
> >
> >
> > At 11:32 AM 07/16/2001 -0400, Chris Covington wrote:
> >
> > >All,
> > >
> > >Since I got the 200q20v back, I've noticed that somehow the shifter boot
> > >and square mounting part got pulled up.  I can realign it and get it to
> > >sort of line up and snap in, but only one side of the boot (the right
> > >side) seems to say attached and the left side just lays down and then
> > >gets pulled up later after a few shifts.  What's the proper way to make
> > >the boot stay on?
> > >
> > >Chris
> > >'91 200q20v
> > >
> > >_______________________________________________
> > >200q20v mailing list
> > >200q20v at audifans.com
> > >http://www.audifans.com/mailman/listinfo/200q20v
> >