Watch this hose

[Tom Nestor]

A good "heads ups" Phil. This hose is also an issue on the 3B, not sure
about the AAN. Just replaced mine with what I think was 3/8 reinforced hose.
I did this while the head was off the motor, which made the job MUCH easier.
I believe it would normally require the removal of the hydraulic pump for
access.

Tom Nestor

> MC engine - small and short rubber hose from the cylinder head water entry
to the pipe passing round the front of the engine to the turbo.
>
> Mine blew at 145mph and cost me the head.  DM1900 for parts, DM800 for
labour, plus 16% tax.
>
> --
>  Phil Payne
>  http://www.isham-research.freeserve.co.uk
>  +44 7785 302803
>
>
>
> _______________________________________________________________________
> FSmail - Get your free web-based email from Freeserve: www.fsmail.net
>
>
>
>
>