front end smash need advice

[Brian O'Neill]

well, i work at a frame shop. did the new subframe
bolt right in ?? how are the hood gaps on the other
side of the car ?? im guessing that the car was hit on
the side and not the front ?? if the subframe bolted
right up and the car was not hit front the front
affecting the frame rail, and your gaps are good, you
dont have any frame damage. frame labor is about 40-50
bucks and hour here ( pittsburgh ) and youll have 2
hours rack set up, minimum of 2 hours to pull and 1-2
hours to measure, if the shop has a measuring system. 
                                      brian o'

93 90 cs
90 80
89 80 
88 944 turbo s (for sale )

--- BUStedVW <sales at bustedvw.com> wrote:
> 
> Hello folks. I have acquired a 84 4kq for cheap
> ($450) the problem is that
> the right front fender was smashed. Also the right
> front wheel was pushed
> back. I have replaced the sub frame (used), control
> arm (new), and
> strut/wheel bearing housing (used with new wheel
> bearing). The problem is
> that this did not completely fix the problem. Now
> the wheel is not so far
> back but is still back about 1 in. Can I take this
> to a frame shop and have
> them pull it? Am I crazy to put to much into this
> car? Will pulling it
> effect the integrity of the car. So far I have only
> $560 plus time invested.
> Any idea how much it would cost to pull the frame
> straight. Any help would
> be appreciated. Thanks a bunch, in advance!
> 
> Joe Mitchell
> e-mail: sales at bustedvw.com
> phone: 303-530-1358
> fax: 303-440-0772
> Hours: Mon-Fri 7am-10pm
>        Sat-Sun 8am-9pm
> Shop online at www.bustedvw.com
> All parts guaranteed for 30 days.
> Visa and Mastercard excepted.
> We are located in beautiful Boulder, Colorado 80301.
> 
> 


__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/