[urq] Wheel bearing part # Urq? - Warning

Jim Haseltine Jim at ur-q.freeserve.co.uk
Sun Jul 22 00:31:00 EDT 2001


Warning - TFA is misleading.

Although the 75 and 82mm bearings are listed for both front and rear of the
Ur-q, to the best of my knowledge the 82mm bearing was never used in the
rear.

Note that there is no VIN break listed for the rear bearings.

Regards,

Jim Haseltine

----- Original Message -----
From: "colin cohen" <ccohen5 at compuserve.com>
To: <urq at audifans.com>; "qlist" <quattro at audifans.com>
Sent: Saturday, July 21, 2001 2:18 PM
Subject: [urq] Wheel bearing part # Urq?


> Can anyone help me confirm the wheel bearing part numbers for the front
and
> rear of a 1985 Urq? The EKTA says that there is a kit in 2 sizes
>
> 443 498 625 = 75.07 mm
> or
> 443 498 625 E = 82 mm
>
> for both front and rear.  I have also heard that
>
> 443 407 625 {E} is the part # for the bearing alone.  Is this correct?
Are
> any of the kit parts needed to do a front bearing replacement other than
the
> bearing and the packing grease?
>
> I also saw the numbers
>
> F 85 F 901500 for the 75.07 mm bearing and
> F 85 G 900 001 for the 82 mm bearing - what do these refer to?  An OEM
part
> # perhaps?
>
> Thanks for any help.
>
> Colin
>
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>





More information about the quattro mailing list