A/C tool to replace seal -- Help!

[Karl Kauffman]

Actually, he's a residential/commercial a/c serviceman, not automotive.
Turns out that after all this time, he just went to NAPA and picked-up a
clutch removal tool, so he's got the clutch off.  Now he needs to find the
tools to R&R the shaft seal.  He's going to check back at NAPA again, and
I'll have him check out the www.hancockindustries.com site that Christopher
pointed out.

Thanks for the responses!

Karl
'81 Coupe -- 124k mi

----- Original Message -----
From: Brian O'Neill <briano_72 at yahoo.com>
To: Karl Kauffman <karlmk at uswest.net>; quattro list <quattro at audifans.com>
Sent: Saturday, July 21, 2001 5:49 PM
Subject: Re: A/C tool to replace seal -- Help!


> thats is sad, if he is a car a/c guy. it should be the
> same too to remove a gm clutch, should be avalible in
> any pep boys, advanced, auto zone.
>                                         brian o'
>
>
> --- Karl Kauffman <karlmk at uswest.net> wrote:
> > Dad's been without A/C for the past month..... and
> > this is in Phoenix,
> > Arizona!  He drives 50 miles round-trip for
> > work,can't park in shade at
> > work, and had to endure a 116F day a few weeks ago!
> > He's a bit stubborn
> > about doing the fix himself (he is an A/C
> > serviceman), but he can't find the
> > tool to do the job.  He thinks all he needs is a
> > bolt that will thread into
> > the clutch to pull the clutch off.  What is needed
> > to replace the shaft
> > seal, and where can such a thing be found?  This is
> > for a 1986 5000 S with
> > Nippondenso compressor.
> >
> > TIA
> >
> > Karl
> > '81 Coupe - 124k mi
> >
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Make international calls for as low as $.04/minute with Yahoo! Messenger
> http://phonecard.yahoo.com/
>