Eurolight harness questions...

[Bob Rossato]

This may not apply to you (don't know what the 87 5ktq eurolights are like)
but, if you have a 4 bulb system which uses an H4 bulb, I would use 3
relays.  One for each pair of filaments. Otherwise, on high beams you'll be
running 4 bulbs on one relay which could be pushing it depending on your
bulb wattage and relay rating.

Bob

> -----Original Message-----
> From: quattro-admin at audifans.com [mailto:quattro-admin at audifans.com]On
> Behalf Of Beatty, Robert
> Sent: Tuesday, July 24, 2001 1:18 PM
> To: 'audi list'
> Subject: Eurolight harness questions...
>
>
> Going to be redoing my eurolight harness and was wondering...
>
> Do i need to have 4 relays... 2 each side for hi/low? or would one high
> relay and one low relay be able to handle the current load?
>
> would make things significantly easier to set up.
>
> Thanks
>
> Rob
> 87 5ktq
>