Up and Running!!! Adjustable Cam Gear????

ed armstrong edshred2000 at yahoo.com
Thu Jul 26 14:54:42 EDT 2001


Good point, can you compensate a 4 degree cam advance
with a 4 degree retard on the distributor ??


--- Ti Kan <ti at amb.org> wrote:
> ed armstrong writes:
> > About the adjustable cam gear....I recently
> contacted
> > TT motors in Oregon about their adjustable cam
> > sprocket for VW 8v four cylinders. They said it
> would
> > fit a Audi I-5. Same number of teeth (45?) and
> > dimensions. Cost was around $120.  Timing could be
> > advanced/retarded +-6degs.  I'm still considering
> > getting one for my project 90q turbo.
> 
> Don't forget, though, that the adjustable timing
> sprocket will change
> only the cam timing on a 4 cylinder car, but on the
> 5-cyl it will also
> change ignition timing.  The ignition distributor is
> driven by an
> intermediate shaft off the timing belt on the
> 4-cylinder cars, but is
> cam driven on the 5-cylinder.
> 
> -Ti
> 01 S4 2.7 biturbo quattro
> 84 5000S 2.1 turbo
> 80 4000 2.0
> -- 
>     ///  Ti Kan                Vorsprung durch
> Technik
>    ///   AMB Research Laboratories, Sunnyvale, CA.
> USA
>   ///    ti at amb.org
>  //////  http://www.amb.org/ti/
> ///
> 


__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/



More information about the quattro mailing list