Re Pressure bleed

[Mike Del Tergo]

>I did not do a bench bleed per say( btw, the bentley doesn't mention it, it 
>just says in MC replacement; "...bleed the brakes...").
What I did was open the fittings in the MC while at 15 psi, and let some
fluid running.You might be right regarding the angle, and with the longer 
MC, this angle is even worst.

Carlos,
My replacement M/C came with 2 plstice fittings in the Holes that I used to 
fill/draw fluid into before I pressure bled the system.  While I like the 
your bleeder, I own the same one, I still physically pump the pedal once or 
twice(clutch or Brake) when doing the change just to make sure the pistons 
move and the units are full.  With brand new internal seals it helps insure 
that the units are really full.
Mike



_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp