80tq: Update and EFI ECU info

[JShadzi at aol.com]

Its been a while since the last update, so I thought I would send one  =)  

The car is running very well, I have been driving it about 50 miles a day 
since the conversion 3 or 4 months ago.  I went to 5 psi on the original 26lb 
injectors, then went to 12 psi with with some 30lb injectors, soon I will be 
going to about 18-20 psi with 45lb injectors.  I have ended up with about 5 
or 6 very good fuel maps for different driving conditions which can be loaded 
on the fly if needed.

As I have mentioned before, I wish I could give you all a ride -being we are 
Audi enthusiasts who love to modify them to go faster, I think you all would 
appreciate it.  12psi may seen like woohoo, but 12psi in this car is making a 
lot more power than any CIS car I have ever modified or tuned, the difference 
is the efficient intake tract helped by the lack of the CIS airflow meter.  

With 12psi, it is tough to accelerate in this thing around town or on the 
freeway without hitting rediculous speeds...lets say you are cruzing at about 
40 on a normal road through town in 3rd, mash WOT, and it about 3 or 4 
seconds the car is going 60-70 mph, very fun.  18-20psi should be interesting 
as well.  Accelerating through cornerns in 1-3 gear challenges even the 
traction of Quattro, especially 1st gear.

I have recieved an overwhelming # of requests for more info on the fuel 
system and the supplementary fuel system I used in the original turbo 
conversion, so I have posted a page that gives specifcations and availability 
info if anyone is interested. 

Please check out:
 www.80tq.com/ECU1

Javad Shadzi
www.80tq.com