Disabling 5kq Headlamp warning

[Kneale Brownson]

If you want to look it up in the archives, do a Google search for: < 
Keeper: Defeating Headlight Warning  >  by Al Powell, who used Igor 
Kessel's information regarding the relay identification and alteration.

Or ask, and I'll send it to you in an e-mail attachment.


At 06:57 PM 06/23/2001 -0700, Todd Phenneger wrote:

>Subject says it,
>   I'm looking in the archives.  I'll keep looking.  But
>basically , when you relay the headlamps on the 5kq the warning
>light will come on.  Now if memory serves, to disable it you can
>either
>  A) run a jumper wire on the relay for the Auto Check system.
>WHich relay and which terminals do you jumper.  And I believe
>this would disable the remaining auto check features for the
>lamps.  Also, IF you go this route do you leave the relay in and
>jumper terminals or JUST jumper the terminals and remove the
>relay.
>
>  B) Put a resistor inline with the wire the powers the relay or
>something.  But this has to go through to ground so do you have
>to then short this to ground through a resistor???  Dont quite
>get this one but have heard about it.
>Thanks
>   Todd
>
>__________________________________________________
>Do You Yahoo!?
>Get personalized email addresses from Yahoo! Mail
>http://personal.mail.yahoo.com/
>