86 5kcstq code 2113

[Burl Vibert]

Even simpler,  use an old spark plug with a rather large gap,
just stick it in the cap and rest it on the block.  You don't
have to hold it and you don't get zapped or screw up the cap.

Burl Vibert
1987 5kcstq
Kingston, Ontario



Nate Stuart wrote:
> 
> Might want to use a very small screwdriver to shove in there then. The OE
> Audi wires do not use the larger dia. plug ends that many other makes/models
> use. The OE wires are designed to fit over only the threads at the top of
> the plug, and not the cap. "Shoving" a screwdriver up in there may dork
> things up nicely if it is too large.
> 
> Just a thought...
> -Nate
> '89 90q
> 
> > Pull the wire off the plug, shove a screwdriver in it to make connection
> and
> > crank it to see if you get spark.
> 
> > ALWAYS worked for me (to test for spark)