Type44 Adjusting Koni Reds Front BTDT?

[Nate Stuart]

----- Original Message -----
From: Orin Eman <orin at WOLFENET.com>
To: Joseph Rae <quattro at centurytel.net>

> When you push the shaft down, you'll feel it bottom out.  Keep pushing
> while turning and you'll feel the adjustment mechanism engage.  Now
> start counting turns anti-clockwise until it stops (full soft).
>
> DO NOT USE AN AIR GUN to tighten the top nut or you'll mess up the
adjustment.

Wait, didn't you just say that you have to push the shock shaft down to
engage the adjustment mechanism? Then how would the use of an air gun really
affect the setting if the shock is fully extended?

Not that I am promoting the use of the vicious attack tools (I use them as
infrequently as possible), just wondering where the logic is coming from.

Later!
-Nate
'89 90q