Removing oil filter brackect on 89 200Q

[Peter Berrevoets]

Why?

Repaired my 200Q just recently and didn't need to do any such thing. Loosen
the clamp and pop it off.

HTH

Peter Berrevoets
1990 200TQ
Toronto, Canada
http://frontpage.home.net/pjberr/



> >-----Original Message-----
> >From: quattro-admin at audifans.com
> >[mailto:quattro-admin at audifans.com]On
> >Behalf Of Peter Golledge
> >Sent: Monday, March 19, 2001 1:52 PM
> >To: quattro at audifans.com
> >Subject: Removing oil filter brackect on 89 200Q
> >
> >
> >Listers,
> >
> >To gain access to the frost plug/coolant spout on the
> >block it appears that I need to remove the oil filter
> >bracket from the block.  Any BTDT advice on this
> >operation?  It appears from ETKA that a large banjo
> >bolt holds the main bracket, does this contain a
> >filter screen?  Apart from the gasket sealing the
> >bracket to the block what else should be replaced when
> >performing this task?
> >
> >Thanks
> >--
> >Peter Golledge
> >