Type 44 power window failure - fixed

[Ti Kan]

Paul Meyers writes:
> [ cleaning type 44 power window switch ]
> Any suggested disassembly instructions?

Once you get the switch off the car, look carefully at the switch itself.
You'll find that the "bezel" portion of the switch is a separate piece.
and with a few very small flat blade screwdrivers (the type that
Radio Shack sells in a plastic box set) inserted into the switch body
in the appropriate locations the bezel will come off.  Be careful because
as the bezel comes off, the button part of the switch will also be
freed, along with all the innerds.  Note how the ball and the contact
spring is situation within the switch.  When you re-assemble the switch
you'll need to place everything back into place.

-Ti
01 S4 2.7 biturbo quattro
84 5000S 2.1 turbo
80 4000 2.0
96 A4 2.8 quattro (sold but not forgotten)
-- 
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Research Laboratories, Sunnyvale, CA. USA
  ///    ti at amb.org
 //////  http://www.ibiblio.org/tkan/
///