CIS experts-click here

[Andrew Lundy]

Javad--

Most of this is above my level of knowledge but one thing I can add is that
on the 80/90's there is a fuse for the ISV.  Actually it's the fuse for the
cold start valve, ISV and a few other things....it's fuse #28.  It one of
the fuses below the "Motor" cover.

HTH!!
---
Andrew Lundy
fast928 at prodigy.net
90 80q
91 90
95 90q



----- Original Message -----
From: <JShadzi at aol.com>
To: <quattro at audifans.com>
Sent: Saturday, May 05, 2001 11:23 AM
Subject: CIS experts-click here


> Ok, I am having trouble getting the EFI equipped 80tq to idle.  I am still
using the ISV, and even incoporated the idle switch on the throttle body.
The problem I am having is that there is no 12v to the ISV terminal (this is
a two wire ISV).  To make sure, I even tested the power to the cold start
valve and no 12v there either.  The fuse for the "warm up valve" is not
blown, and as far as I know there is no fuse for the ISV...could the CIS ECU
have been damaged by the shorting of the throttle switch wires?  What am I
missing here...
> TIA,
> Javad
>