Transverse link rear suspension type 44 '87 5000tq
james accordino
ssgacc at yahoo.com
Thu May 10 20:19:41 EDT 2001
--- "Swann, Benjamin R. (BSWANN)" <BSWANN at arinc.com>
wrote:
> Haudi,
>
> I isolated some flakyness going on with the rear
> suspensionin '875kcstqw to
> the outer ball joint on the left rear transverse
> link. I need to replace
> the balljoint. This link goes from the rear
> cross-member to the top of the
> wheel hub, and has ball joints on both ends.
>
> Since the ball joint was $140 and the whole link
> assembly including both
> ball joints was $170 at the dealer, I'm going to
> replace the whole thing.
>
> Is this a pretty straightforward job - any BTDT?
> I'm hoping it will take me
> only a few hours with no special tools, but don't
> want to get started on it
> if it requires any special tools. It looks simple
> enough in the Bently -
> 42.15-42.17.
>
I just replaced mine on my 89 200q before Christmas.
I got them from Megaparts online. Left one was
$104.90 and right was $111.57. That was the cheapest
I found. Shipping, including a few other items I
bought was $6.34 and I got them in about 3 days. This
might save you about $120. The R+R was a piece of
cake. I used a pickle fork to carefully separate the
ball joint from it's mount. It took about 1/2 hr. to
do both sides with air tools.
HTH
Jim Accordino
More information about the quattro
mailing list