Audi hydralics...drat! (longish)

[james accordino]

--- John Cassidy/Sallyann Mulcahy <jcasidy at qwest.net>
wrote:
> Thanks Jim.  And I thought I had the hard part done!
>  I think I'll just
> remove the tank and clean it and the filter.  I'll a
> little curious about
> how to get the old fluid flushed from the rack and
> the bomb...
> 
There is more than 1 way I'm sure.  You can use some
of your new fluid to pour through.  You can use
compressed air to blow out the old fluid.  Don't use
very high pressure on the air though.  Unfortunately
these methods involve removing hoses going into and
out of said component.  I couldn't find a solution to
this problem that was acceptable to me and I don't
find it very difficult to remove the hydraulic
components so this lead me to the method I described
in the previous post.  Maybe some other lister will
have a less "labor intensive" solution.  

Jim Accordino