Strut tower brace/wheel upgrade/intake mod

[Brendan]

Yeah, I did this...You can just drill two holes in the sheet of horizontal 
metal about 2 feet below the current position of the pump and reinstall 
there. Should be nearly effortless, well, besides the drilling....Took me 
about 30 minutes with some paint in the drilled-out holes...

At 07:56 AM 5/16/01 -0400, Roa, Greg wrote:
>When looking at the area to see if this is a feasible idea, it looked to me
>like the cruise control pump was in the way.  Anyone know if this must be
>relocated too?  Anything else get in the way?
>
>Greg Roa
>Cincinnati, OH
>86' 4kcsq
>93' 90 CS
>83' 944
>
>
>
> >Reply-To: <mswanson at mswanson.com>
> >From: "Marc Swanson" <marcswanson at mediaone.net>
> >To: <one at humanspeakers.com>, <nicksimc at plu.edu>
> >Cc: <quattro at audifans.com>
> >Subject: RE: Strut tower brace/wheel upgrade/intake mod
> >Date: Tue, 15 May 2001 16:17:53 -0400
> >
> > I recommend the type 89 unit - cheap, simple, cool looking... Marc has
> > one on his 4kqt.  Not sure if it will clear the battery though.
> >
> >dunno either.  My battery is hiding in the trunk  :-)
> >On Huw's 90 it comes REAAAALY close to the battery so I wouldn't be
> >surprised if it doesn't fit with a decent size battery in place on the type
> >85.
> >
> >Anyhow, here is a pic of it installed on my 4ktq:
> >
> >http://marcswanson.ne.mediaone.net/images/finished1.jpg
> >
> >
> >-Marc-
> >
> >
> >/* +++++++++++++++++++++++++++++++++++++
> >+Marc Swanson                          +
> >+                                      +
> >+http://marcswanson.ne.mediaone.net    +
> >+                                      +
> >+87 4kcstq                             +
> >+88 90q                                +
> >+85 4ksq                               +
> >+87 5ktq   donor (Parting out)         +
> >+++++++++++++++++++++++++++++++++++++ */