stiffer e-brake return spring?

[Kneale Brownson]

At 04:53 PM 05/22/2001 -0400, Larry C Leung wrote:

>Let me know too!
>
>TIA,
>
>LL - NY
>
>On Mon, 21 May 2001 20:04:37 -0700 "Torbjorn" <torbjorn at flashmail.com>
>writes:
> >Has anyone had any luck finding a stiffer e-brake return spring


The real solution is to disassemble the caliper and clean out the corrosion 
inside, especially in the e-brake actuator chamber.  The need for a stiffer 
spring is just a symptom of lubricant and seals failure that eventually 
will lead to the calipers hanging up and not releasing totally from the 
rotors even if you're not using the e-brake.