Sunroof not pausing at closed position.

[Ti Kan]

Leah and David Mueller writes:
> I have the sunroof.  together again on my project 1986 4kcsq.  It will not
> pause however between the closing and tilting, nor between from tilt to
> close.  It keeps operating back to full close or full tilt before the motor
> pauses.  The motor will stop only at full open or full tilt. But it will not
> pause at closed.  I hope this makes sense.  Is it the relay on the motor
> itself or timing somehow off?

There should be a microswitch that senses when the sunroof has reached the
close position, perhaps it is not making contact, has loose wires, or
is mal-adjusted.

-Ti
01 S4 2.7 biturbo quattro
84 5000S 2.1 turbo
80 4000 2.0
--
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Research Laboratories, Sunnyvale, CA. USA
  ///    ti at amb.org
 //////  http://www.amb.org/ti/
///