Search for Rick and Quat needs

[Marc Swanson]

On Thursday 08 November 2001 09:08 am, Rave Racer wrote:
>     Well, it is rare that I ask the all knowing list a question, but this
> isn't about technical probs that I have but parts sourcing.  I need motor
> mounts.  I thought one, but on closer inspection I think I'd better get'em
> all.  Is there a place where I can get good motormounts at a good deal?

Rod at TPC carries em all (http://www.thepartsconnection.com).

You need:

- 2 motor mounts (yes, you can use the one from the type44 turbo.. they are
hydraulic filled while the 4kq ones are not) (~$50 each.......)

- 2 transmission mounts (~ $25/each)

- 3 rear differential mounts (~$25/each.. two of them look somewhat like the
tranny mounts while the third is circular and needs to be pressed into the
diff mount at the rear of the differential).

You may decide to skip the circular mount on the back of the diff because
that will make the job a bit harder.  If you really want to go nuts, replace
the subframe and control arm bushings while you are there... ~150 for all of
those (4 per subframe.. they are slightly different so watch for p/n's, + 2
per control arm ~$4 each).


HTH


-Marc-
87 4ktq
88 90q