Ignition Switch or Starter????

[Lundy, Andrew]

Could be either.  You'll have to see if the wire from the switch is sending
a signal (+12v) to the starter solenoid (can be done with a voltmeter or
circuit tester).  If no signal then check wiring and switch.  If there is a
signal then your brushes are probably shot!!  BTDT!!

HTH!!
---
Andrew Lundy
90 80q
99 A6q

-----Original Message-----
From: Iain Atkinson [mailto:iain.atkinson at tesco.net]
Sent: Friday, November 09, 2001 8:52 AM
To: quattro at audifans.com
Subject: Ignition Switch or Starter????


Hi Folks

got a prob that ineed to share, my Coupe Q (4000q)won't turn over not even a
click from the solenoid on the starter. Car can be push started and starts
fine. Is it the ignition switch not doing it's job or the starters
completely screwed?????


Need some btdt please before i change the starter for the spare and ignition
switch too.


Cheers


Iain