Installing '91 20020V Sports Seats into '87 5ktq

[DeWitt Harrison]

On Fri, 09 Nov 2001 16:33:30 -0500,
      Michael Pshenishny <pshenm at rpi.edu> wrote:

> I have a pair of '91 200 20VT sport seats that I would like to install
> into my '87 5kcstq.  The rails are fine, but the motor harness for the
> driver's seat differs from the current setup.  Heaters look to be easy
> to plug in on both sides, and the passender side seems okay.  Anyone
> else been in the same situation and come up with a solution, or is it
> time to find wiring diagrams for both seats, and create an adapter by
> butchering extra harnesses?

Yes, the clean way to do it is to make your car look like a '90 or '91
200 electrically. This is fairly easy to do since all the signals are the
same, just on different wires and connectors. Find a wrecked 200
and cut off several inches of the harness that goes to the new style
connector on the driver's seat. I can probably unearth a wiring
list for the conversion around here somewhere.

DeWitt Harrsion
88 5kcstq