(no subject)

[Brian O']

dash bulbs are easy, just 2 screws under the column
for the black shield, 2 screws at the bottom of the
cluster, and 2 or 3 plugs in the back of it to unplug,
no speedo cable, your speedo problems, you prob, will
not be able to see anything or fix anything, no
offense, im a mechanic and i know im not a circuit
board kinda guy !! just take note of where the bulbs
you needed are, or just replace em all now and get it
overwith !!! the colors of the plastic designate the
watts/amps of the bulbs. be very careful, if you bump
the dash you will more than likely blow out the temp
and auto gear display if you have it, they are very
touchy, just like if you remove the little wood grain
surround from your heater controls ( cs only ) and
blow out your heater display bulbs. sometimes audis do
suck !! your check engine light is prob either o2
sensors ( how old are they ?? over 60k ?? replace em
anyway !! ) or your egr valve is plugged up, mine has
been doing this since last winter, i am lazy !!
                                         brian o'
93 90 cs
90 80
89 80 ( for sale )
88 944 turbo s ( for sale )


--- "Greville H. Bowles" <zaphod at cansafe.com> wrote:
> I have a couple of issues with my '95 90Q that I'd
> like some help with.
>
> For starters, the speedometer/odometer, which was
> having intermittent
> problems, has now died. It just does not register
> speed or distance. I need
> a couple of instrument lights replaced so I thought
> that I'd simply (ha, ha)
> yank the cluster and see what's inside. I have the
> Bentley CD so I can look
> at diagrams before hand. Is this something a novice
> should attempt or would
> people recommend spending the bucks to have a pro do
> it? Perhaps I should
> look and see if the cable has become disconnected
> from the transmission
> before anything else, assuming it runs on a cable
> like "lesser" cars.
>
> A week ago the "Check ECS" light came on at highway
> speed. I pulled over to
> investigate (RTFM) and the light went out, so I
> continued on my way. 2
> nights ago the light re-appeared and now comes on
> after 3-5 minutes of
> running and stays on. Obviously my baby needs
> attention. What is the
> recommended sequence (if any) in which I should
> check the components of the
> ECS? Are there any obvious first things to do?
>
> Thanks for any help you can offer.
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Mr. Greville H. Bowles
> RR 5, Rockwood, Ontario CANADA
> Phone: (519) 856-0213
> E-mail: zaphod at cansafe.com
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>


__________________________________________________
Do You Yahoo!?
Find the one for you at Yahoo! Personals
http://personals.yahoo.com