10v -> 20v -> 20vt

[Marc Swanson]

> The calculations I have done tell me the NG lower end with the 20v head
> will result in about 8.5:1, I am doing some measurments to determine if the
> pistons will need to be relieved or not to clear the valves.

Maybe the 6.5:1 figure I was getting was when used with the MC block.  Have
you bolted an NG block to a 7A head to check for clearances before?  Would be
nice to know if it fits once and for all (eg piston clearances, etc)!


Later

-Marc-
87 4ktq
88 90q