[s-cars] Code 2413?

[Dave Aukerman]

Congrats! you've just taken away any of the filtering ability of the K&N
filter by washing and not re-oiling.  May as well just run it without a
filter at this point.  Otherwise, put a stock filter in.

Dave


----- Original Message -----
From: "Levent Cur" <leventcur at ameritech.net>
To: <jimk at spotgraphicsinc.com>; <quattro at audifans.com>;
<s-car-list at yahoogroups.com>
Sent: Wednesday, November 28, 2001 4:54 PM
Subject: RE: [s-cars] Code 2413?


> Ok I went to the Audi dealer for them to look at my cars setup with my
> MTM Stage 1+, even installed, they determined the MAF to be bad. Cause
> the oil from my K&N Filter coated the wires and that metal thing in the
> middle of the wires, and rather than paying a dealer installed quote of
> $822 for a new MAF I took it out and apart and cleaned the wires and
> that metal piece with a qtip and some rubbing alcohol. Its been 2 months
> not a code yet, and it used to come on 3 or more times a week depending
> on how hard I drove it or let it sit in idle. But now it doesn't come on
> at all I have sine that cleaning changed the plugs with new ones, and
> changed the oil and cleaned my K&N without putting oil into it... but it
> still looks red, so not all the oil is out. I have also cranked down the
> stock wastegate 2 complete turns noticed a little better lower end
> response. But yeah that outta do it. I have not a single leak anywhere
> in any of my boost of vacuum lines, they did about 2 hours or testing,
> cause I made them do as many extensive tests as possible for my 2413
> code.  Also the exhaust still stinks like sulfur every now and then, I
> attribute that to bad cats I think, but I am getting a Stromung 3"
> exhaust from turbo back, here before the end of the year!! So that outta
> solve the stink.
>
> --Levent Cur--
> 95 Audi S6 Silver/Blk, 48,000 miles, MTM Stage 1+,18x8" SSR Integral
> GT-1's!
> 93 Audi 100CSQ 151,000 w/5spd,The car is FOR SALE!!!!
>
> Goto: http://quattro.dynip.com/newrims.jpg for my 95 S6, and
> Goto: http://quattro.dynip.com/for%20sale.html for my 93 100CSQ
>
> -----Original Message-----
> From: jimk at spotgraphicsinc.com [mailto:jimk at spotgraphicsinc.com]
> Sent: Wednesday, November 28, 2001 2:08 PM
> To: s-car-list at yahoogroups.com
> Subject: [s-cars] Code 2413?
>
> Hello,
> Car is apparently getting a code 2413:
>
> Mixture Adjustment,
> Adaptation limit exceeded,
> Symptom: Rich mixture, increased fuel consumption
>
> Any BTDT?  This is the code that keeps coming up with my high-boost
> backing off problem.  Paul, others that switched from MTM 1+ to Lehman
> Software, did you get this particular code?
>
> Jim
> 93S4
>
>
>
> To unsubscribe, email: s-car-list-unsubscribe at yahoogroups.com
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>