Replacing fuel lines on a CGT. I would like to know the fitting size.

[JShadzi at aol.com]

For the fuel pump you can use a 12mm banjo fitting, then into the fuel filter
and FD either an AN-12x1.5 mm or you may be able to use another 12mm banjo
there.  Leaving is the same 12x1.5.  The return line is not under pressure,
you could likely save yourself some money there by leaving the stock line or
going with low pressure hose instead, but it depends on what you would like
to accomplish.

HTH,
Javad
80tq.com

In a message dated 11/29/2001 7:00:02 AM Pacific Standard Time,
passat_ts at hotmail.com writes:

<< I'm going to replace the fuel lines on my Coupe GT with Aeroquip lines and
 fittings, from the fuel filter to the fuel distributor and also the return
 line.
  >>