Seems like bad turbo. Need help!

[ed armstrong]

I can also confirm that my K-26 only "spins" for about
1 sec too so that may be OK. When you refer to 'vanes'
are you talking about the impeller ? The impeller
should not come into contact with the housing. A
little play on the cold side is normal.

 -ed 




--- Konstantin Bogach <kbogach at home.com> wrote:
> I looking into K-26 outlet and I think that
> something is not right:
> edges of vanes are worn like after rough file and
> when I spin shaft it
> come to stop very quickly (about 1sec) compare to
> K-24 in another car I
> have which spins about 3-4 sec before it stops.  I
> am not sure it
> happens just because K-26 is bigger.   What might be
> a reason for that?
> I don't know exactly how turbo is built inside. I
> have Bentley but I did
> 
> not see it shows turbo internals.  What is usual
> cause when  turbo needs
> 
> to be rebuilt?
> 
> Thank you.
> 
> Konstantin Bogach.
> 200tq '89 (K-26)
> 200tqa '89 (K-24)
> 
> 
> 
> 
> 


__________________________________________________
Do You Yahoo!?
NEW from Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month.
http://geocities.yahoo.com/ps/info1