Interior Temp Sensor

[Larry C Leung]

Mike,
 
It sounds also like your blower motor's brushes are going. A quick temp
fix it to find the armature cooling hose to the motor in the plenum,
remove it from the motor, give the brush a good shove to drive it back
against the armature, and re-attach the hose. It'll work for a little
while (month or so) and you may be able to do it again but eventually,
you'll need a new blower motor. 

LL - NY

On Sun, 07 Oct 2001 18:55:19 -0400 Michael Williams <campvw at home.com>
writes:
>Hi everyone,
>My 89 100's fan blower has quit. Actually not 100%. It will kick on 
>just
>a little and then die off. In running through the climate control
>diagnostics, it shows an open on the roof temp sensor. I've undone 
>the
>access panel on the roof and sure enough the temp sensor is 
>unplugged.
>The problem is that I can't find where to plug it back in to. My only
>thought is that it should connect to a wire as opposed to anything
>related to the roof motor mechanism that I can see. Does anyone know 
>if
>this wire should be coming in from the left side or right side as I 
>face
>front?? I've looked and felt around and can't seem to find it. If I 
>know
>what area to look in then I can concentrate there. I appreciate all 
>your
>help.
>Thanks again
>Mike Williams
>