Looking for crankshaft pully with no AC belt !

[Jim Green]

I was thinking about that, then I test fitted the
alternator belt into the AC slot, and the slots are
different.  The alt. belt sits lower in the grove when
it's in the AC slot.  It would probably still work. I
may give it a try since do have a spare that I can cut
off.
Jim
--- James Marriott <marriott at micron.net> wrote:
> If you have a spare, you should be able to take it
> to a machine
> shop and have them cut off the unneeded part of it.
> 
> cu, James Marriott
> '87 4kq (alias "late-B2 90q") with rare NG engine,
> 181k
> '89 200q (MC1, ProconTen/no bag, 1.8 blah blah),
> 132k
> Boise, ID, USA     http://www.webpak.net/~marriott/
> www.ringsperformance.com
> ----- Original Message -----
> From: Jim Green <jeg1976 at yahoo.com>
> To: Quattro list <quattro at audifans.com>
> Sent: Saturday, October 13, 2001 12:31 PM
> Subject: Looking for crankshaft pully with no AC
> belt !
> 
> 
> > Ok, so I have this intercooler thingy that I'm
> trying
> > to mount in my bumper. If I just had a thinner
> > crankshaft pully without the AC slot, I could
> avoid
> > making my car look "riced out" with the
> intercooler
> > hanging out the bottom.  I know I would have to
> change
> > the offset of the alternator to match, but I need
> to
> > make a bracket to raise it up about an inch
> anyways.
> > Can anyone think of something that might work with
> my
> > MC motor?  I'm too low on funds to go the RS2
> bumper
> > route since there is EFI in the works.  BTW the
> car
> > passed emissions yesterday!  Wheeew.
> > Thanks,
> >
> >
> > =====
> > Jim Green
> > '89 90tq
> > http://www.geocities.com/jeg1976/
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Make a great connection at Yahoo! Personals.
> > http://personals.yahoo.com
> >
> 
> 


__________________________________________________
Do You Yahoo!?
Make a great connection at Yahoo! Personals.
http://personals.yahoo.com