Replacing Flywheel

[JShadzi at aol.com]

Its not keyed, but as Alex says, the bolt holes are in an asymetrical 
"circle", so they will only line up one way, it is almost imperceptable to 
the eye, and you may be able to force it, but if you do it right, with no 
clearance issues, it will only bolt up one way.  One of the pins may have not 
been replaced, or put in the wrong place possibly?
Javad

In a message dated 10/17/01 5:21:02 PM Eastern Daylight Time, 
j.d.larson at verizon.net writes:

<< The f/w is NOT keyed, Alex, it'll go on as many ways as you have bolts.  
The
 trigger pin is on the back, at least in the picture, and AFIK wasn't
 removed.  Bentley stresses marking it before removal, but this guy is out in
 the sticks and didn't know any better.  John
 ----- Original Message ----- >>